Investigation of New Energy Absorbing Mechanisms Used to Fix Rock Bolt Plates
Abstract
In this study, different plate fixing designs were tested in order to improve rock bolting performances. Instead of commonly used steel nuts, different plate fixing designs were investigated by both laboratory and site studies. In addition, the usability of nuts and energy absorbers made of the polyamide type engineering polymer was investigated to assess whether they are advantageous for the aim of supplying high-energy absorbing features. In this experimental study, deformation-controlled load tests were carried out to evaluate the bearing and energy absorption capacities of totally eight different groups of specimens. According to the findings from this study, use of the polyamide material with steel nuts as an energy absorber material, rather than using instead of steel nuts supplies good results. As another outcome, it has been determined that use of proper washers between steel nuts and polyamide absorbers can significantly improve the energy absorption performances. It has been evaluated that the energy absorption capacity of the bolt plates can be economically increased up to 10 times by using suitable polyamide energy absorbers placed between the plate and steel nut parts. It was concluded that the polyamides can be used to remarkably improve the rock bolting performances especially in the rock masses where the high energy absorption capacity property is needed, like those with rock bursting, squeezing and swelling problems.
Keywords:
rock bolts, rock bolt plates, energy absorbing plates, plate fixing mechanismsPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

