Stabilization of Clayey Soil with Alkali-activated Hybrid Slag/Cement
Abstract
This study investigates the stabilization performance of clayey soil treated with alkali-activated hybrid slag/cement. Sodium silicate (SS) and sodium hydroxide (SH) are used as alkali activators, whereas ground blast furnace slag (GGBS) and ordinary Portland cement (OPC) are used as sources of aluminosilicate. A total of 27 different types of mixtures are used for stabilization. Unconfined compressive strength (UCS) of untreated clay and stabilized soils are performed at immediately, 3-, 7-, 28-, and 90 days curing times under air-dried and wet-cured conditions. In addition, 90-d volume and mass changes in the samples are measured. Stabilized samples with an SS/SH ratio of 1 under air-dried conditions reveal moistening at early curing ages (≤28 days); afterward, sodium carbonate crystals appear in these samples at longer curing ages. Geopolymer-treated clayey soil exhibits lower volumetric and mass changes compared with OPC. Most of the stabilized clayey soil with alkali-activated hybrid slag/cement exhibits higher strength compared with OPC under air-dried and wet-cured conditions.
Keywords:
hybrid slag/cement, alkali activation, geopolymer, soil stabilization, high plasticity clayPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

