Effects of Different Wall Openings on the Cyclic Behavior of Aerated Concrete Block Infilled RC Frames
Abstract
In the current study, the effects of infilled reinforced concrete (RC) frames with different window and door openings under cyclic loads were investigated. For this purpose, five in-filled RC frames with different infill wall openings were produced. The main parameters to evaluate overall performance of the RC frames with infill walls, the load carrying capacities, displacement ductility, stiffness degradation and energy dissipation capacities were determined using obtained results. At the end of the study, even if the opening ratios are the equal, it has been observed that the location and number of openings have a significant effect on the behavior and failure pattern of the RC frames. Also, increase in the openings ratio decreases the load carrying capacity, and energy consumption capacity. Based on these results, it is suggested that infill walls affect the structural behavior and failure pattern. Therefore, infill wall openings should be considered in the design of RC structures.
Keywords:
RC frame, infill wall openings, aerated concrete, cyclic loading, experimental studyPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

