Accuracy Assessment of “Step-by-Step” Simulation Modeling Method for Rock Breaking by TBM Disc Cutters Assisted with Laser
Abstract
Rock breaking by laser-assisted disc cutters is a novel high-efficiency rock breaking mode that combines mechanical stress induced by the disc cutters with thermal cracking by laser. This paper presented a “step-by-step” simulation modeling concept, and conducted an in-depth study on potential influencing factors of simulation accuracy at each key step. First, the prediction accuracy of laser holes in laser drilling simulation was discussed. Second, the SHPB simulation and experiment were carried out to evaluate the accuracy of the selected material constitutive model in simulating the dynamic fracture damage of rock. Then, taking the laser-assisted rock-penetrating process of the scaled disc cutter as an example, the simulation prediction accuracy of rock-breaking by the disc cutter was analyzed. Finally, the simulation and experiment of laser-assisted disc cutter penetration into rock was carried out, and then the feasibility of the “step-by-step” concept was analyzed. The results show that: (1) in the laser drilling simulation, the predicted accuracy of laser hole size is higher when the power is low; with the laser power increases, the large amount of glass glaze will affect the subsequent modeling accuracy; (2) the HJC model can be used to simulate the transient nonlinear fracture damage behavior of granite; (3) the damage morphology of the granite obtained by the penetration simulation is highly similar to the experimental results, and the load curve should be corrected by the peak point fitting method. The results show the application prospects of the proposed numerical modeling method in future laser-assisted TBM tunnelling.
Keywords:
“step-by-step” model, laser-assisted, simulation modeling, rock breaking, disc cutterPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

