Strength Improvement Using Polypropylene Fiber as Reinforcement in Natural Pozzolana-lime-stabilized Expansive Clayey Soil Artificially Contaminated by Sulfates
Abstract
This paper aims to assess the behavior of the unconfined compressive strength (UCS) of polypropylene fiber (PF) reinforced natural pozzolana-lime-stabilized expansive grey clayey soil (GS) contaminated by sulfates. Lime (0–8%), natural pozzolana (NP) (0–20%), and PF (0–3%) by dry weight of soil were used. GS was contaminated by different sulfate contents (0-6%) and UCS was assessed at various curing periods (7–120 days). Results showed that adding 8% lime alone or with 20% NP considerably improved UCS. Including 1% or 2% PF as reinforcement without sulfates in lime-stabilized GS transferred stress from GS to PF due to bonding. However, increasing PF beyond 2% formed lumps, reducing contact and friction coefficient, thus decreasing UCS. This means that the optimum PF dosage was found to be 2%. The UCS of GS increased with PF content up to 2% and then decreased. The UCS significantly increased with higher calcium sulfate content and curing period due to observed cementing agents in X-ray diffraction (XRD) and scanning electron microscopy (SEM). Adverse effect of ettringite mineral on UCS caused by sodium sulfate addition was suppressed with the combination of 20% NP and 2% PF in lime-stabilized GS. Binding forces from lime and NP resisted to ettringite expansion. Sensitivity of UCS to sulfate effect was more pronounced with sodium sulfate than calcium sulfate. In addition, NP–PF mixture in lime-stabilized GS was more effective, improving the strength of expansive soil, especially with sodium sulfate. In conclusion, reinforcement of NP-lime-stabilized expansive soils with PF is an effective method.
Keywords:
expansive grey clayey soil, additives, unconfined compressive strength (UCS), microstructure and mineralogy, reinforcementPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

