Residual Durability Performance of Glass Fiber Reinforced Concrete Damaged by Compressive Stress Loads
Abstract
Concrete is exposed to a variety of stresses throughout its service life, which can result in cracks and damage. The use of fibers in concrete mixtures is known to improve the mechanical and durability properties of the concrete. In this study, glass fiber-reinforced concrete cube specimens were produced and stressed at 70 and 90 percent of their maximum compressive strength. The effects of stress loading-induced cracks and glass fiber reinforcements on mechanical and durability properties of concrete specimens were investigated using UPV, capillary water absorption, acid effect, and high-temperature effect tests. Glass fibers increased compressive strength and reduced water absorption in specimens that were not stressed. On the other hand, glass fibers increased the durability of stressed specimens at both degrees of compressive load stress. The bridging effects of glass fibers reduced crack creation, resulting in improved UPV test results. Glass fibers did not dissolve in acid solution due to their chemical resistance, resulting in less weight loss and higher compressive strength in concrete specimens. In the high-temperature effect tests, decreasing compressive strength values were observed as the stress load and temperature levels increased. However, such reductions were lower for glass fiber reinforced concrete than for control concrete without glass fiber. As a result of the present findings, glass fiber reinforcements prevent stress-induced cracks, making the concrete more durable and stronger against external forces.
Keywords:
GFRC, durability, high-temperature, acid effect, fiber-reinforced concretePublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

