Experimental and Numerical Study on RC Beams Strengthened by NSM Using CFRP Reinforcements
Abstract
Near Surface Mounted (NSM) Carbon Fiber-Reinforced Polymer (CFRP) reinforcement technique to improve the flexural strength of reinforced concrete members has become increasingly attractive in recent years. In this study, the practical problem of concrete cover depth cutting limitation was investigated. Twelve specimens were tested by four-point bending until failure. Experimental parameters include concrete cover depth, CFRP reinforcement type, CFRP positioning, and stirrups status. Furthermore, a nonlinear FEA model was developed to simulate the tested beams and was able to predict the experimental behavior satisfactorily. A series of parametric studies were then performed using this model to understand the effect of various reinforcement parameters on the flexural performance of the beam. The results showed that Strengthening with CFRP resulted in a significant increase in yield and ultimate strengths, but a significant ductility loss was recorded due to CFRP strip debonding in the strengthened beams, this problem was addressed by using more efficient strengthening techniques utilizing the effective bond length and a proper groove depth and positioning for the NSM bars.
Keywords:
NSM, RC-beams, experimental, FEA, parametric studyPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

