Evaluating the Cyclic Behavior of the Sloped Extended End-plate Beam-to-column Connections
Abstract
In the Northridge and Kobe earthquakes, brittle failure of the welded beam-to-column connections was observed in steel structures. So, bolted connections were considered as an alternative to these kinds of connections. Extended end-plate beam-to-column con-nection is one of the most commonly used connections in steel structure. In this article, the behavior of the sloped extended end-plate beam-to-column connections is studied. Finite element method was used to investigate the behavior of the connection by ABAQUS software. The main aim of the study was to investigate the cyclic behavior of the four beam-to-column connections with beam angles of 0, 10, 15, and 20 degrees with respect to horizon. Also, the behavior of the mentioned connections was compared with extended end-plate connections with perpendicular angle. Results showed that the ductility and moment-resisting capacity of the sloped extended end-plate beam-to-column connections decrease by increasing beam angle, but rotational and moment-resisting capacities of the models satisfy the limitation of the design codes such as 0.04 drift limit for bearing capacity before failure.
Keywords:
cyclic behavior, extended end-plate connection, sloped moment connection, finite element model, hysteresisPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

