Size Effect on Flexural and Fracture Properties of Polypropylene Fiber-reinforced Engineered Cementitious Composite
Abstract
The size effect on flexural properties and fracture behavior of polypropylene fiber-reinforced engineered cementitious composite (PPFECC) containing local waste materials was investigated. Geometrically similar notched beams with dimensions of 190 × 70 × 70 mm (small), 380 × 70 × 140 mm (medium), and 760 × 70 × 280 mm (large) were tested using three-point bending to study the size effect on flexural properties, toughness, and fracture behavior in PPFECC and the influence of tensile ductility of PPFECC on the size effect parameter. Two PPFECC mixtures containing 1% (PPFECC1) and 2% (PPFECC2) volume fraction of polypropylene fibers were prepared. The results indicated clear size effect on ductility, flexural strength, normalized deflection, normalized toughness, and fracture energy for both PPFECCs. The flexural properties and fracture behavior in PPFECC1 were more sensitive to the size effect parameter due to its lower tensile ductility compared to PPFECC2. Moreover, according to Bažant’s size effect curve, the behavior of notched beams in PPFECC2 with higher tensile ductility was closer to the strength criterion compared to PPFECC1.
Keywords:
size effect, engineered cementitious composite, fracture energy, toughness, ductilityPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

