ANALYSES OF MULTI-EDGE FOOTINGS RESTED ON LOOSE AND DENSE SAND
Abstract
Shallow footings are generally designed as square, rectangular, strip, circular or ring in geotechnical engineering. In some cases, different shallow footing geometries (irregular footing geometries) also can be selected because of the static, architectural and economical reasons. Multi-edge shallow footings are irregular shaped footings having the number of the edges and sides greater than four. They are used to transmit the loads from the irregular shaped structures to the underlying soils safely and economically. The study presented herein describes the use of artificial neural networks (ANNs) and multi-linear regression model (MLR) for prediction of ultimate loads of multi-edge shallow footings. The data used in running of network models have been obtained from extensive series of laboratory model tests. The parameters investigated are the footing width, the footing length and the density of sand soil. A total of fifty tests were performed using the parameters of the footing geometry (H, +, T and square shaped), the footing size and the soil type (loose sand, dense sand) on the bearing capacity characteristics. The results of the experimental study proved that the soil density and the footing size had considerable eects on the load of and the ANN model serves as simple and reliable tool for predicting the behavior of the multi-edge footings.
Keywords:
model test, multi-edge footing, bearing capacity, sandPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

