Flexural Behavior of Reinforced Concrete Beams with FRP Bars Exposed to Elevated Temperature
Abstract
The present study aims to evaluate the performance of concrete beams with different Fiber Reinforced Polymer (FRP) and steel bars exposed to elevated temperatures through a detailed experimental investigation. Flexural behavior of beams is analyzed with Carbon Fiber Reinforced Polymer bars (CFRP), Basalt Fiber Reinforced Polymer bars (BFRP), Glass Fiber Reinforced Polymer bars (GFRP), and steel bars tests. Beams were exposed to elevated temperature 925 °C (1 hr) following standard fire curve, and subsequently cooled by either natural or forced water spraying. After the cooling, beam specimens were tested under four-point loading up to the failure load. Ultimate load and deflection profile of heated and unheated beams are evaluated. At higher temperatures (925 °C), the steel and GFRP specimens show a higher strength loss of about 60–80% with higher deformation values. The load carrying capacity of CFRP beams is found to be higher as compared to other types of beams. Specimens cooled by water shows higher strength loss of about 7–12% than air cooled specimens. The failure pattern of beams with FRP and steel beams are different, and it is based on heating cooling regime.
Keywords:
FRP bars, reinforcement steel, elevated temperature, flexural behaviour, failure modePublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

