Estimating the Seismic Strength of Infill Walls by Means of Hollow Brick Prism Tests
Abstract
Architectural infill walls interact with the surrounding reinforced concrete load bearing members of the building under lateral earthquake loads and can change the system behavior significantly. Therefore, lateral strength calculation of these walls may become mandatory for the designers. These infill walls often formed with horizontally-hollow clay based bricks in many regions of the world. However, strength of these bricks depends on the loading direction and bricks remain in the diagonal compression strut of an infill wall are subjected to biaxial compression. Thus, testing procedures investigate the strength only in the direction perpendicular to the bed-joint seems insufficient to reflect actual behavior. Accordingly, it is confusing for designers to determine or consider compressive strength of hollow clay bricks in order to model and calculate the strength of an infill wall. To clear up this confusion, the seismic strength of plastered infill walls made up of horizontally-hollow bricks were tried to be estimated by various prism tests. The effects of loading direction, plaster, and presence of a single or double brick on prism strength were experimentally investigated. Six reference walls and more than 170 prism specimens were tested in accordance with this scope. The correlation between prism and infill wall strength was established with a valid and practical method. Results showed that diagonally loaded plastered prism group successfully and adequately estimated the experimental infill wall strength. In addition, if diagonal testing is not possible to conduct, the average strength of the vertically and horizontally loaded prism tests may be used instead.
Keywords:
brick, strength, brick wall, loading direction, ASTM C1314Published Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

