Preliminarily Experiments of Liquid Scintillation Cocktail Waste Solidification
Abstract
Liquid scintillation spectroscopy (LSC) is a widely used laboratory method for measuring radioactive especially low-energy alpha and beta emitter isotopes in solutions. Since the scintillation cocktails (SCs) contain large amounts of aromatic hydrocarbon compounds after the LSC measurement, the sample usually becomes organic radioactive waste, which is challenging to manage and dispose of. The most common and effective waste treatment method is incineration, a costly and cumbersome solution. Another simpler and less expensive way is the immobilization the organic liquids by embedding in cement or geopolymer matrix.
The aim of our experiments is to find a universal mix design to solidify and immobilize scintillation cocktail wastes (SCWs) of unknown composition. During the measurement, we assumed that the SCWs could contain Ultima Gold, Ultima Gold LLT, InstaGel Plus and ProSafe FC type scintillation cocktails in pure form or mixed with unknown quantities of water. Therefore, we performed experiments with inactive pure SCs as surrogates to mimic the SCWs. Since the water content determination of the organic solutions is difficult, the mix design must be independent of the water content of SCWs.
During our experiments, we found an appropriate mix design to solidify all available SCs up to 5% using CEM I 42.5 N type cement, Metaver N type metakaolin and sodium hydroxide. We could solidify our tested SCW with this mix, and this product meets the waste acceptance criteria of all Hungarian radioactive waste repositories.
Keywords:
radioactive waste treatment, organic waste solidification, scintillation cocktail, Liquid Scintillation Spectroscopy, LSC wastePublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

