Experimental and Probabilistic Investigations of the Effect of Fly Ash Dosage on Concrete Compressive Strength and Stress-strain Relationship
Abstract
The effect of fly ash (FA) dosage on concrete’s compressive strength and stress-strain relationship is investigated in two steps in this article. First, an experimental program was conducted on concrete mixtures designed with 0% (control batch of 30 MPa mean cylinder compressive strength), 10, 20, 30, and 40% of ordinary Portland cement (OPC) mass replaced by FA, which is taken from a new source in an Asia country. The test results showed that compared to other investigated dosages, concrete using 20% FA/OPC mass-replacement gained the most improvement in the 28-day compressive strength and tensile split strength, as well as the compressive strength development. Second, a probabilistic investigation was conducted using Dropout Neural Network, Bayesian Neural Network, and Gaussian Process models. These artificial intelligence-based models were compared to other models reviewed from the literature, showing relatively good results in terms of the statistical metric R2, which are 0.92, 0.9, and 0.88, respectively. The three models were tested and validated with a dataset of 1032 experimental results on FAC collected from the literature. When testing with the experimental results obtained in the first step, a good correlation between the predicted values and the experimental results was observed within the confidence interval of (5%, 95%), showing the reliability of the proposed models. Thus, the stress-strain relationship of fly ash concrete can also be investigated in a probabilistic manner. It is proved in this study that among the proposed models, Dropout Neural Network has the best balance between performance and time complexity.
Keywords:
fly ash, concrete, strength, stress-strain, probabilistic, machine learning, neural networkPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

