The Effect of Elevated Temperature on Ordinary Portland Cements
Abstract
A study was directed to analyze the influence of the different types of Ordinary Portland Cements (OPC) on the hardened cement paste exposed to high temperatures. Hardened cement paste specimens with three types of cement and nine water-cement ratios were investigated and heated to 11 heat steps at 28 days of age. Residual compressive strength and relative residual compressive strength were compared to the unheated results. It was shown that the expected range for the relative residual strength of the different types of OPC up to 400 °C is between 90 and 100%. From the local minimum at 150 °C to the maximum at 300 °C. The CEM I 52.5 type of cement shows the least favorable behavior to the increased (over 400 °C) temperature, according to the results of the residual compressive strengths curves and the newly introduced Integrated Temperature Endurance values after the first water-cement ratio (0.3). Nine water-cement ratios were tested with the favorable types of OPC (CEM I 42.5 and CEM I 32.5). At all water-cement ratios, the residual strength tendencies for the two types of cement were parallel. It has been observed that changes in the water-cement ratio have little to no impact on the relative strength curve's shape or the relationship between strength and the water cement ratio. As a result of our experiments applying simply Ordinary Portland Cement, it is obvious that the CEM I 32.5 type of OPC cement significantly outperformed the CEM I 42.5 type in regards of post-heating strength tendencies.
Keywords:
cement, Ordinary Portland Cement, residual properties, compressive strength, integrated temperature endurancePublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

