Mechanical Behavior of Soil Foundations Reinforced with Geosynthetics Exposed to Normal and Reverse Fault Ruptures
Abstract
Surface fault ruptures damage structures which are located at the intersecting zones of active faults. It is essential to consider the undesirable effects of surface fault ruptures when designing structures. Geotechnical measures such as reinforced soil foundations effectively mitigate the hazards related to surface faults. The present work conducted a series of tests on foundations reinforced with geosynthetics, including geogrids, geocells and geogrid-geocell layers. These tests simulated the behavior of 1.5 m-wide strip footings located in 6-m thick alluvium that had been displaced 60 cm. A total of 12 disparate tests in terms of the number and type of reinforcement were conducted at a scale factor of 10. Image analysis of the results indicated desirable behavior for reinforced soil foundations in terms of reduced angular distortion, uniform settlement and deviation of the fault path. For normal fault rupture, the angular distortion of foundations reinforced by one geogrid layer, one geocell layer, one geogrid-geocell layer or two or three geogrid layers decreased by 60%, 30%, 70%, 80% and 80%, respectively. These results also revealed that an increase in the number of geogrid layers to more than two layers caused an insignificant decrease in angular distortion. The decrease in angular distortions observed for soil foundations reinforced by one geogrid layer, one geocell layer and one geogrid-geocell layer were 7%, 16% and 40%, respectively, for reverse faulting. The performance of a reinforced soil foundation subjected to normal faulting was more acceptable than that for reverse faulting.
Keywords:
geocell, geogrid, reinforced foundation, differential settlement, angular distortion, fault deviation, normal and reverse faultsPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

