Effect of Maximum Aggregate Size and Powder Content on the Properties of Self-compacting Recycled Aggregate Concrete
Abstract
The utilization of recycled aggregates and various industrial by-products is considered a sustainable strategy in the concrete industry. In this study, the effect of the maximum size of recycled coarse aggregate and the cementitious binder content on fresh and hardened properties of self-compacting concrete was investigated. Self-compacting concretes with maximum aggregate sizes of 9.5 mm, 12.5 mm, and 19 mm were prepared at water-to-binder ratios of 0.39, 0.42, and 0.45, respectively. For all mixtures, 100% recycled aggregate was used as coarse aggregate and 60% of cement was replaced by industrial by-products, i.e., fly ash and ground granulated blast furnace slag. The tests included slump flow, air content, hardened density, compressive strength, elastic modulus, and splitting tensile strength. The results showed that the increase in maximum aggregate size and binder content tended to improve both fresh and hardened properties of self-compacting concrete.
Keywords:
recycled aggregate, self-compacting concrete, supplementary cementitious materials, cement content, maximum aggregate sizePublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

