Experimental Study on Size Effect and Fracture Properties of Polypropylene Fiber Reinforced Lightweight Aggregate Concrete
Abstract
In this experimental research, the effects of polypropylene fibers on size effect and fracture properties of lightweight aggregate concrete were studied. Two methods, including size effect method and work of fracture method, were used to investigate and analyze the size effect and fracture properties on different sizes of notched beams. The polypropylene fiber contents were 0.5%, 0.75%, and 1% by volume fraction. The obtained results revealed that increasing the polypropylene fibers in lightweight aggregate concrete relatively decreased the dependence of strength on the size effect parameter, while the addition of polypropylene fibers exhibited significant influence on decreasing the size dependency of ductility and fracture energy in lightweight aggregate concrete. Moreover, the increase of polypropylene fibers improved the total fracture energy (GF), initial fracture energy (Gf), characteristic length (lch), length of fracture process zone (cf), and critical stress intensity factor (KIc) of lightweight aggregate concrete in both size effect method and work of fracture method. This increase was more significant in work of fracture method because of considering the post-peak behavior. The size effect method was suitable and accurate for plain lightweight aggregate concrete. The GF ⁄ Gf ratio increased from 2.88 in plain lightweight aggregate concrete to 12.26 in polypropylene fiber reinforced lightweight aggregate concrete.
Keywords:
lightweight aggregate concrete, fracture energy, size effect, polypropylene fiber, characteristic lengthPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

