Dynamic Response and Safety Control of Newly Poured Secondary Lining Concrete under Large Section Tunnel Blasting-A Case Study of Longnan Tunnel of Ganshen High-speed Railway
Abstract
The age of newly poured concrete is short, the cementation between aggregates is weak. At this time, the vibration will affect its performance. The secondary lining concrete newly poured in the tunnel is close to the work face and is susceptible to blasting vibration during construction. In order to study the safety threshold of blasting vibration velocity of newly poured secondary lining concrete in tunnels, the finite element model is established in ANSYS with the large-section Longnan tunnel project as an example. The attenuation law of vibration velocity in three directions of secondary lining under blasting load was analyzed by combining field blasting monitoring with numerical simulation, and the reliability of numerical simulation was verified. Through the numerical simulation results, the vibration velocity and von mises stress distribution of the newly poured secondary lining concrete of the tunnel are analyzed; combined with the dynamic tensile strength theory of concrete, the safety threshold of vibration velocity of newly poured secondary lining concrete of tunnel based on numerical calculation is established; through the indoor vibration test, taking the compressive strength and acoustic velocity of concrete as the indexes, the safety threshold of blasting vibration velocity of newly poured secondary lining concrete of tunnel based on shaking table test is obtained. Combined with the results of numerical simulation and vibration test, the safety threshold of blasting vibration velocity of newly poured secondary lining concrete in large-section tunnels is obtained, and the standard in this field is improved.
Keywords:
blasting, tunnel secondary lining, newly poured concrete, dynamic response, safety thresholdPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

