Feasibility of Onboard Smartphones for Railway Track Geometry Estimation: Sensing Capabilities and Characterization
Abstract
The performance and sensitivity of smartphone sensors developed rapidly in recent years. Due to their accessibility and low costs compared to other industrial solutions, the use of smartphone sensors has become more and more common. In this article, the validity and reliability of a smartphone application in railway track geometry estimation are tested on a conventional rail line. This work focused on Galaxy S-series smartphones of Samsung and proposes an evaluation of the onboard sensing capabilities of their inertial sensors with the comparison of synchronous measurements by a multi-functional Track Recording Vehicle equipped with a contactless Track Geometry- (TGMS), and a Vehicle Dynamic Measuring System (VDMS). The raw accelerometer recordings showed a high-degree correlation with VDMS in both signal magnitude and waveform. The accuracy of gyroscope angular tracking in heading and pitching angle calculation was in the range of 0.2°–0.6°, which allowed the acceptable estimation of the central angle and the radius of horizontal curves. Based on the kinematic analysis techniques, the roll flexibility coefficient of the vehicle was determined, which allowed calculating the cross-level and the twist of the track. Furthermore, the local extreme values of the roll-rate gyro correlate with the isolated track geometry defects of the track twist gathered by TRV’s TGMS. Despite its limitations, the application of smartphones represents a prospective technological opportunity to explore new approaches and support rail asset management.
Keywords:
track geometry estimation, track recording car, in-service vehicle, Inertial Measurement Unit (IMU), smartphonePublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

