Simple Equations for Predicting Maximum Displacement of Isolation Systems Using Lead Rubber Bearings
Abstract
Predicting maximum displacement is an important task in designing isolation systems. An effective procedure that is widely used for this task is equivalent linear force (ELF) procedure, which is allowed by many contemporary design codes. This procedure uses very basic parameters of the isolation system as well as earthquake condition of the site to analyze for the maximum displacement. However, ELF procedures are time-consuming because they require an iteration process. This study employed an ELF procedure to generate a large database and used it to develop explicit and simple equations that can directly calculate the maximum displacement of isolation systems using lead rubber bearings. The proposed equations can confidently predict the maximum displacement calculated by the ELF procedure. In addition, the investigation showed that the first to post-yield stiffness ratio of an isolation system, which is difficult to accurately determine, has neglected effect on the maximum displacement calculated by the ELF procedure. Based on this observation, a simple equation that uses only three input parameters to predict the maximum displacement was proposed. The input parameters to the simplified equation include normalized characteristic strength and post-yield period of the isolation system, and 1-s spectral acceleration of the site. These parameters are minimum to determine an isolation system and earthquake condition. The comparison between the maximum displacement predicted by the proposed equation and the maximum displacement calculated by the ELF procedure showed that the proposed equation generates slightly conservative results for common designs, therefore is suitable for practical application.
Keywords:
lead rubber bearing, maximum displacement, equivalent linear force procedure, isolation system, earthquake responsePublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

