Prediction of In-plane Stiffness for the Cold-formed Steel Frame of the Wall Panel Structure
Abstract
The purpose of this research was to study the lateral deformation behavior of cold-formed steel wall panel structures using experimental tests, finite element analysis and analytical methods to study the lateral stiffness of these structures. The wall panel structures were tested by full-scale experiments the experimental results of which were verified by a 3D-finite element model. The verification results showed a good correlation between the experimental tests and a finite element model. The single-column spring model was proposed for an elastic lateral stiffness analysis of the cold-formed steel wall panel structures that were formed by combinations of a guide cantilever beam and springs connection. The spring constants were defined by using the stiffness of the stub-chord connection and the bending stiffness of the chord. The experiments tests and finite element analysis were used to verify this single-column spring model. The comparison results showed good agreement between the analytical prediction, finite element analysis and experimental data in the case of the primary type of cold-formed wall structure. The proposed procedure was an efficient method for elastic lateral deformation analysis of cold-formed wall panel structures which can be used for such configurations.
Keywords:
wall structure, cold-formed steel, lateral stiffness, single-column spring modelPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

