Calculation of Dynamic Amplification Factor for Railway Concrete and Masonry Arch Bridges Subjected to High-speed Trains
Abstract
The dynamic amplification factor (DAF) is one of the most important parameters to express the dynamic behavior of bridges under moving loads. This parameter is used in bridge design codes instead of exhaustive dynamic analyses. Therefore, the DAF and the possible derived relationships can be good alternatives to dynamic analyses because of time and computational cost savings. Masonry arch bridges are complex infrastructures due to their geometry and structural behavior, and it is troublesome to prepare an accurate numerical model. To conduct dynamic analyses, due to their multiplicity, calculating the DAF of the bridges imposed by high-speed trains can lead to a rapid assessment of these old railway arch bridges. For this purpose, in the present study, the finite element models of two concrete and masonry arch bridges with small fill material heights, which are completely different in terms of geometric and mechanical characteristics, were prepared. In the next step, by performing 378 dynamic analyses based on the 27 different train models, the DAF has been computed. The results show that the calculated DAFs are in the rational range, and bogies interval, axles interval, and span length are recognized as the most important parameters in the DAF changes.
Keywords:
old railway infrastructures, concrete and masonry arch bridges, dynamic amplification factor, high-speed trains, finite element modelsPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

