Seismic Performance Assessment of a Pin-bearing Restraint System for Curved Bridge
Abstract
The traditional restraint systems limit the deformation of curved bridge under temperature load, which results in radial and tangential secondary internal forces in the bridge. This paper proposes a pin-bearing restraint system (PBRS) for curved bridge, which can relax the rotational deformation of curved bridge under temperature load. Its configuration and working mechanism are illustrated. The finite element model of a curved bridge with PBRS is established using ANSYS software, and nonlinear time history analysis is conducted. The pounding force and pounding number between pin and slot under ground motion are analyzed. The pin stiffness, the gap and the ratio of upper structure mass to lower structure mass are selected for parametric study. The results show that the pounding force and pounding number present dramatic changes with pin stiffness. As the pin stiffness increases, the pounding force presents a logarithmic linear tendency, and the pounding number shows a reduce tendency. Gap has little influence on pounding force and pounding number. The radial pounding force and pounding number increase with the increase of mass ratio.
Keywords:
curved bridge, bearing, restraint, FEM, time history analysisPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

