The Effect of Silicate Modulus on the Properties of Polypropylene Fiber-reinforced Geopolymer Composite Material
Abstract
This study investigated the effect of the silicate moduli on the properties of the geopolymer materials consisting of Class F fly ash (FA) and ground granulated blast furnace slag (GGBFS). For this purpose, geopolymer materials were prepared with alkaline solutions composed of 10 M NaOH and sodium silicate solutions (SSs) with two different silicate moduli (2Ms and 3Ms). The geopolymer mixtures were placed in molds (40 x 40 x 160 mm) and cured at 90 °C for 5 hours. After heat curing, physical, mechanical, XRD, and SEM-EDS analyses were performed on 7-day samples. According to the findings, polypropylene fiber reinforcement improved the flexural and compressive strength of the samples with high GGBFS content. Also, according to SEM-EDS analysis, it was concluded that the higher the CaO content, the lower the compressive strength, and the higher the Al2O3 content, the higher the compressive strength. As a result, the 2Ms SS improved the compressive strength of the samples with higher FA content, while the 3Ms SS improved the compressive strength of the samples with more GGBFS than FA. 1.5% polypropylene fiber-reinforced 3Ms SS samples with 25% FA had the highest compressive strength.
Keywords:
silicate modulus, geopolymer, fiber, fly ash, GGBFSPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

