Lightweight Rubberized Concrete Slabs for Sustainable Road Pavements Serving Non-Auto Traffic
Abstract
Non-auto transportation infrastructure, such as bicycle lanes and sidewalks, serves as an efficient means of public mobility. Improving the sustainable design and construction of the concrete slabs that compose such roads promotes environmental and economic benefits, spanning the usage of green sources of materials and reduced maintenance costs. In this study, an investigation into the application of recycled tires, also known as tire-derived aggregate (TDA), combined with rotary-kiln produced expanded clay (EC) as coarse aggregates in concrete, as well as their life-cycle cost assessment, are presented. The mechanical properties of concrete specimens with three different mix designs, i.e.,100% EC (MIX A or control mix), a mixture of 20% EC – 80% TDA (MIX B), and 100% TDA (MIX C) as coarse aggregates, were first derived through experimental tests. Impact-fatigue tests were then conducted on concrete slabs of MIX A, B, and C to evaluate their sustainability under several cycles of bicycle loads. The results showed that the TDA concrete has lower compressive and flexural strength, but it is more ductile than concrete with zero rubber content. Also, the results of impact-fatigue tests combined with a life-cycle cost analysis indicated the long-term benefits of constructing green and durable infrastructure using TDA on future investments in transportation.
Keywords:
sustainability, pavement slabs, rubberized concrete, expanded clay, life-cycle analysisPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

