Mechanical Behavior and Application of a Novel Supporting and Retaining Structure for Slope
Abstract
This paper proposed a novel supporting and retaining structure used to high-steep building slope reinforcement. It combined with an anti-sliding pile and an inclined supporting column, which is used as a fulcrum on the upper part of pile. The mechanical characteristics of the novel supporting and retaining structure are studied firstly by two mechanical methods and two numerical methods, respectively. Result shows that the axial force will be evenly distributed along the column body and it provide a quite resistant force, meanwhile. There are two shear force concentrated areas of the anti-sliding pile, one is from the top of the embedded area of the pile body to the potential slip plane, the other is at the joint. Subsequently, the results of these methods are compared synthetically and the differences between the results are also discussed. It shows that a large shear force and moment will be caused at the restrained end of the pile body by the force method and 2D numerical model 1. And in Wenkler model and the 2D numerical model 2, the rock is considered non-rigid, the anti-sliding pile will produce a certain amount of deflection under the sliding thrust, which reduces the shear force and moment at the top of the embedded area of the pile body. Finally, the novel supporting and retaining structure is applied to the site, and the monitoring data shows that the novel supporting and retaining structure is economic and effective for the reinforcement of the high-steep building slope.
Keywords:
high-steep building slope, novel supporting and retaining structure, mechanical characteristics, design internal forcePublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

