Research on the Rheological Properties of Asphalt Binder Modified by Fume Silica and Crumb Rubber Compound
Abstract
This study investigates the effect of using Fume Silica (Aerosol 300) alone and together with crumb rubber (CR) in bitumen modification on the traditional and rheological properties of the binder and compares it to the SBS modified binder. Using the aerosol additive in the binder at the rates of 0.5%, 1%, 1.5%, and 2% were determined as the most convenient ratio and CR+aerosol modified binders were prepared per this ratio. The binders were subjected to the softening point, viscosity, frequency sweep, bending beam rheometer (BBR), and Fourier Transform Infrared spectroscopy (FTIR) tests in the context of the study. Besides, the optimum conditions were determined according to the response functions by designing an experiment with statistical regression according to the Response surface methodology (RSM). The results indicate that the optimum aerosol ratio is 1.5%. With the use of 1.5% aerosol in 6% CR modification per bitumen weight, it was found that (1) the softening point increases and the temperature sensitivity decrease in comparison to other binders, (2) the consistency of the binder increases, (3) the complex modulus values increase and become more resistant to rutting, (4) the low-temperature parameters enhance by performing more flexible behavior, (5) there may be physical changes in the structure even though there is no chemical reaction in the binder with the use of CR and aerosol additives, and (6) the experimental data and theoretical data obtained from the RSM method are consistent as per the statistical analysis.
Keywords:
fume silica, crumb rubber, modification, rheology, response surface methodologyPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

