Experimental and Numerical Investigation of Different Types of Jacketing Effect on Retrofitting RC Short Columns Using ECC Concrete
Abstract
Given the deterioration of civil infrastructure throughout the world, developing more efficient repair and strengthening is essential. Jacketing is one of the most common methods for retrofitting reinforced concrete (RC) columns. Notably, using engineered cementitious composite (ECC) within the jacketing area increases the bearing capacity and significantly enhances the ductility of the columns. The recent development of ECC concrete with suitable compressive strength and higher ductility of about 5 % can significantly enhance the performance of reinforced concrete structures. The behavior of retrofitted RC columns depends heavily on the cohesion between the jacket and the original column as well as the mechanical properties of the jacketing materials. This study investigates jacketed square and circular RC columns using ECC and conventional/normal concrete (NC) using different casing techniques to retrofit RC columns, namely galvanized mesh, U and L-shape joints, removing the cover, core drilling, and integrated models. All specimens were subjected to a compression test. The results indicate that in both square and circular specimens, the use of ECC as a super ductile material and vertical U-shaped elements to connect the longitudinal rebars of the casing and the core leads to much higher ductility and bearing capacity than in NC specimens. These elements also showed suitable ductility because of using ECC as a super ductile material. In order to optimize these methods, finite element analysis (FEA) was conducted using Abaqus software to verify experimental models, as well as a parametric study to achieve an optimum design of the jacketing.
Keywords:
repair, jacketing techniques, retrofitting, RC short columns, engineered cementitious composite (ECC)Published Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

