A Detailed Investigation of the Bond Performance of Basalt Fiber-Reinforced Polymer Bars in Geopolymer Concrete
Abstract
This comprehensive experimental study aimed to determine the bond performance of basalt fiber reinforced polymer (BFRP) bars in geopolymer concrete (GC). The study examined the bond performance of BFRP bars and GC by considering several parameters, including bar diameters of 8, 10, and 12 mm, embedment lengths of 4, 8, and 12 db mm (where db is the diameter of the bar), concrete covers of 20, 40, and 70 mm and compressive strengths of 21.7 and 34.4 MPa. The study also compared the effect of the bar surface and bar type on GC bond performance. Eventually, the results were compared with ordinary concrete (OC). The obtained results indicated that an increase in the BFRP bar diameter results in a decrease in the average bond stress. Similarly, an increase in the length of the bond leads to a reduction in the bond stress. The specimen possessing a short embedment length failed due to bar pullout, while the specimens with a longer embedment length failed as a result of concrete splitting. The outcomes also showed that the strength of bond increases with an increase in compressive strength and cover thickness. Furthermore, the results also indicated that BFRP-reinforced GC has comparable bond performance to steel-reinforced GC and BFRP-reinforced OC and performed better than OC. Last, Comparisons between the existing bond-slip models were offered to demonstrate the best bond stress-slip model for FRP bars and GC for ascending branch up to ultimate bond stress of the bond slip curves and for whole curves.
Keywords:
BFRP, Bond stress, concrete cover, embedment length, fiber-reinforced polymer, geopolymer concrete, GFRP, pullout, slipPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

