Crack Healing and Mechanical Properties of Bacteria-based Self-healing Cement Mortar
Abstract
In this study, the improvement of mechanical properties and crack healing as a result of the calcium carbonate precipitation due to bacterial activity have been investigated in two phases. First, the optimum mix design of self-healing cement mortar has been achieved considering different amounts and concentrations of the bacterial solution of bacterium Sporosarcina pasteurii (ATCC 11859) in non-pre-cracked specimens. Some of the mechanical properties, such as compressive strength, flexural strength, energy absorption capability, and weight change in bacteria added cement mortar specimens are compared with those of control specimens. Second, using the determined optimum mix design, mechanical properties of self-healing cement mortar specimens with initial cracks are compared with those of non-pre-cracked specimens to evaluate the recovery degree. 28-day compressive and flexural strengths of cement mortar specimens through direct addition of bacterial suspension with a concentration of 5.1 × 107 cells/ml improved by 45% and 18%, respectively. These results for 7-day specimens were 78% and 24%, respectively. Experimental flexural strengths of pre-cracked specimens are higher than their theoretical values based on the reduced cross-sections, and in pre-cracks with smaller dimensions, higher recovery degrees are achieved.
Keywords:
self-healing concrete, cement-based materials, crack healing, microorganism, mechanical properties, flexural strength, biomaterialsPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

