Three-dimensional Discrete Element Simulation of Interaction between Aqueduct and Tunnel
Abstract
In this investigation the effect of interaction between aqueduct and tunnel on the ground settlement has been examined using PFC3D. At first, the calibration of PFC3D was conducted based on UCS test results rendered from three different ground layer. Then intact model with dimension of 70 m × 20 m × 34.5 m (x × y × z) was built. These models are consisted of 8 layers with different mechanical and geometrical properties. Four different configurations for aqueduct were created in four models. Diameter of aqueduct was 2 m and its depth was different in four models. After aqueduct generation, tunnel with diameter of 9 m and length of 20 m was drilled in depth of 22 m. After tunnel drilling, the settlement data of ground surface were picked up. After tunnel simulation, the effect of support lining was investigated on the ground settlement. For this purpose, after each step of tunnel drilling, lining support with diameter of 35 cm was performed. The results show that the maximum value of settlement occurred when aqueduct reach to head of tunnel. Also the safety has maximum value when the distance between aqueduct and tunnel wall was 4.5 m. the ground settlement before and after support lining shows that ground settlement reach to zero by support application.
Keywords:
tunnel, settlement, aqueduct, PFC3DPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

