Laboratory Investigation on the Effect of Microsilica Additive on the Mechanical Behavior of Deep Soil Mixing Columns in Saline Dry Sand
Abstract
Since loose and salty subgrades consider as problematic barriers while constructing new transportation infrastructures such as railway tracks and roads are required, the current study aims to find a solution to stabilize these kinds of subgrades using the deep soil mixing (DSM) technique and micro silica additive. In the present study a series of experimental DSM columns were executed in a salty sand-filled chamber utilizing a laboratory scale DSM apparatuses. In the first step, by adding three salt percentages of 5, 10 and 20 into the original sand, four different sandy subgrades with a relative density of 70% were prepared. Considering three percentages of 10, 15 and 20 for micro silica additive, the water-to-cement ratio of 1, salt percentages of 0, 5, 10 and 20 totally 150 sand-cement columns were constructed in the lab environment. In continuation, unconfined compression strength (UCS) and elasticity modulus of all capped DSM columns have been determined and interpreted using scanning electron microscope (SEM) images at three ages of 7,14 and 28 days. The results indicated that increasing the salinity of subgrade soil from 0 to 20% resulted in a falling UCS and Young module by 28 and 21% for 28-days specimens. Furthermore, as a solution, adding micro silica in cement-water grout up to 15% resulted in enhancing mechanical characteristics of the DSM columns. So that adding 15% microsilica caused a 21 and 42% increase in UCS and elasticity modulus of 28-days samples respectively, executed in subgrade with 20% salt.
Keywords:
deep soil mixing columns, loose salty-sand subgrades, microsilica additive, unconfined compression strength, elasticity modulusPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

