DEM Modeling of Crushable Grain Material under Different Loading Conditions
Abstract
This paper deals with the effect of contact conditions on the crushing mechanisms and the strength of granular materials. The computation of crushable grain material under different loading conditions is performed using 3D model of discrete element method (DEM). The crushable macro-grain is generated from a large number of identical spherical micro-grains which are connected according to the bonded particle model. First, the parameters of the proposed DEM model are calibrated to match the force-displacement curve obtained from Brazilian Tests performed on cylinders made of artificially crushable material. The damage profile right at the point when the force-displacement curve reaches its maximum is seen to replicate the same crack patterns observed in Brazilian test experiments. Then, parametric investigations are performed by varying the coordination number, the contact location distribution, and the contact area. The results show that these parameters play a significant role in determining the critical contact force and fracture mechanism of crushable particles compared to a traditional macro-grain crushing test. Increasing distribution and coordination number of the macro-grain increases particle strength when large area contact is permitted. However, for linear contact area, the effect of increasing coordination number on particle strength is marginal.
Keywords:
grain breakage, micro-grain, macro-grain, DEM simulation, fragmentation patternsPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

