Investigation of the Effect of Bedding Layer Angle and Tunnel Number on the Stability of Tunnel under Uniaxial Compression Using PFC2D
Abstract
In this paper the effect of bedding layer angle on the stability of tunnel under uniaxial compression have been investigated using particle flow code in two dimensions (PFC2D). For this purpose, numerical rectangle models with dimension of 100*100 mm have been prepared. These models consist of layers with different mechanical properties i.e., concrete layer and gypsum layer. The angle of these layers related to horizontal axis change from 0° to 90° with increment of 15°. These models are consisting of one, two and three tunnel. The diameter of tunnel change based on the tunnel number. The tunnel diameter was 6 m, when one tunnel exists in the model. The tunnel diameter was 3 m, when two tunnels exist in the model. The tunnel diameter was 2 m, when three tunnels exist in the model. These models were subjected to uniaxial compression. The results show that tensile cracks are dominant mode of fracture occurred in the models. The joint angle and tunnel number have important effect on the failure pattern and failure strength. Also, the mechanical properties of beddings control the crack growth path. The crack grows through the weak layers when bedding angle was equal to 45° and 60°, but it intersects the layer for any other bedding angels.
Keywords:
bedding layer angle, tunnel, PFC2DPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

