Numerical Investigation on Flexural Buckling Behavior of Hot-rolled Steel Columns at Elevated Temperatures
Abstract
In this paper, a numerical investigation on the global buckling capacity of the axially compressed steel columns with hot-rolled I cross-section at elevated temperatures is presented. Geometrically and materially non-linear finite element model and the ABAQUS software were used to determine the buckling resistance. The numerical ABAQUS model was validated using experimental results available in the literature, and then the validated numerical model was used to generate a database of load-carrying capacity. The parametric study covered three different cross-section classes (class 1, 2 and 3), ten different non-dimensional slenderness ̄λ = 0.5, 0.6, 0.7, 0.9, 1.1, 1.3, 1.5, 1.7, 1.9, 2.0), three different temperatures (400°C, 500°C, 600°C), and two stress-strain constitutive relations including (the nonlinear material model adopted in the European guidance for structural fire design EN1993-1-2, and a Bilinear material model), with and without residual stress. The influence of the model parameters on the load capacity of steel columns at elevated temperatures was evaluated. The results of the parametric study were compared with the results of the simplified calculation model presented in EN1993-1-2.
Keywords:
buckling, steel, columns, elevated temperatures, fire designPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

