Support Vector Machines for the Estimation of Specific Charge in Tunnel Blasting
Abstract
Mine tunnels, short transportation tunnels, and hydro-power plan underground spaces excavations are carried out based on Drilling and Blasting (D&B) method. Determination of specific charge in tunnel D&B, according to the involved parameters, is very significant to present an appropriate D&B design. Suitable explosive charge selection and distribution lead to reduced undesirable effects of D&B such as inappropriate pull rate, over-break, under-break, unauthorized ground vibration, air blast, and fly rock. So far, different models are presented to estimate specific charge in tunnel blasting. In this study, 332 data sets, including geomechanical characteristics, D&B, and specific charge are gathered from 33 tunnels. The data are related to three dams and hydropower plans in Iran (Gotvand, Masjed-Solayman, and Siah-Bishe). Specific charge is modeled in inclined hole cut drilling pattern. In this regard, Support Vector Machine (SVM) algorithm based on polynomial Kernel function is used as a tool for modeling. Rock Quality Designation (RQD) index, Uniaxial Compressive Strength (UCS), tunnel cross-section area, maximum depth of blast hole, and blast hole coupling ratio are considered as independent input variables and the specific charge is considered as a dependent output variable. The modeling results confirm the acceptable performance of SVM in specific charge estimation with minimum error.
Keywords:
tunnel, drilling and blasting, specific drilling, Support Vector MachinePublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

