Evaluating the Accuracy of an Equivalent Linear Model in Predicting Peak Displacement of Seismic Isolation Systems using Single Friction Pendulum Bearings
Abstract
This study evaluates the accuracy of an equivalent linear model in predicting peak nonlinear time-history displacement of seismic isolation systems with single friction pendulum bearings. To perform this evaluation, dynamic response of numerical models of 120 isolation systems subjected to 390 strong earthquake ground motions, including motions with pulse and motions without pulse, was analyzed and statistically processed. The results show that the equivalent linear model can partly predict the peak displacement of its counterpart nonlinear model. However, the equivalent model can also underestimate or overestimate the peak displacement. On average sense, the equivalent linear model underestimates small peak displacement and overestimates large peak displacement. It is also observed that the relationship between linear and nonlinear peak displacements depends on ground motion types. Based on the analysis data, equations representing relationship between linear and nonlinear peak displacements at different reliable levels for different ground motion types were proposed. These equations can be used in practice.
Keywords:
equivalent linear model, isolation system, earthquake engineering, time history nonlinear analysis, displacement demandPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

