Behavior of the Dynamic Modulus and Fatigue in Asphalt Mixtures with Blast Oxygen Furnace Slag and Blast Furnace Dust
Abstract
Slag from a Blast Oxygen Furnace (BOF) is produced during the transformation of cast iron, coming from the blast furnace, into steel during the integrated steelmaking process, just as blast furnace dust (BFD) is produced during the transformation of the iron mineral into cast iron. These residues have generated environmental problems due to the accumulation and inadequate disposal thereof. Consequently, this study aims to analyze the use and behavior of the dynamic modulus and the fatigue in asphalt mixtures with partial (50 %) and total (100 %) substitution of the coarse aggregate for BOF slag and the fine aggregate for BFD. The results are compared with the behavior of a mixture elaborated with conventional aggregates. To achieve this objective, the chemical and physical properties of BOF and BFD were determined along with the optimum asphalt cement content, determined using the Ramcodes methodology. Tests were carried out to evaluate the physical characteristics, the dynamic modulus, and the fatigue of each type of mixture. The results of this study demonstrate adequate fatigue behavior and a slight reduction in dynamic modulus in mixtures with BOF and BFD. This allows us to deduce that the use of these residues is feasible and thereby to contribute to sustainable development and the protection of the environment.
Keywords:
blast furnace dust, blast oxygen furnace, dynamic modulus, fatigue, asphalt mixturePublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

