The Effects of Recycled Tire Rubbers and Steel Fibers on the Performance of Self-compacting Alkali Activated Concrete
Abstract
In this study, the effects of recycled tire rubbers (RTR) and steel fiber (SF) on the fresh and hardened state properties of the self-compacted alkali activated concrete (SCAAC) were investigated. The ground granulated blast furnace slag, 1 % hooked-end SF, and two types of RTR were utilized. The crumb rubbers (CR) and tire rubber chips (TCR) were used as a substation to natural aggregates at substation levels of 10 % and 15 %. The fresh state performances were evaluated by T50 value, slump flow, V-funnel, and L-Box tests, while mechanical performances were assessed through compressive, flexural, and splitting tensile strength tests. Also, detailed crack and microstructural analyses were conducted. The RTR adversely affected the fresh state properties, which reduced more with SF inclusions. Among the RTR, the TR specimens exhibited lower fresh state performance than the CR specimens. Similar mechanical strengths were obtained on the TR and CR specimens under the same replacement ratios. However, TR specimens exhibited higher deformation capacities than the CR specimens, when SF was utilized. The SCAAC specimens with 1 % SF and 15 % RTR showed more and wider flexural cracks, higher mechanical strength, and deformation capacity, which can be utilized in structural applications, particularly in high seismic zones.
Keywords:
self-compacting concrete, alkali activated concrete, recycled tire chips, crumb rubber, steel fiberPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

