Study on Optimum Free-face Condition of Cutting Hard Rock with Tunnel Boring Machine Hob
Abstract
To explore the rock-breaking characteristics of cutting hard rock under free-face condition by tunnel boring machine (TBM) hob and obtain the optimum free-face condition, the rock-breaking processes such as crack propagation, amount of micro crack and reaction force with penetration depth are first investigated based on discrete element simulation method. Then, the crack length, rock chip area, specific energy consumption etc. with different free-face spacing (S) and free-face height (H) are studied combined with rock-cutting simulation and experiment. The research results show that the formation of the rock chip under free-face condition by TBM hob is driven by tensile failure, and it exists an optimum free-face condition with the S of 80 mm and the H of 200 mm to promote main crack propagation and enhance the rock-cutting efficiency, which can provide a reference for the application of rock-breaking technology under the free-face.
Keywords:
TBM hob, free-face, free-face spacing, free-face heightPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

