Effects of Elevated Temperatures on the Properties of High Strength Cement Paste Containing Silica Fume
Abstract
High strength concrete (HSC) production is worldwide increased and gradually replacing the normal strength concrete (NSC). The cement matrix of concrete is the essential part that governs the behavior and strength of concrete. Several researchers have focused on the performance of hardened cement paste (HCP) at ambient temperature such as using different types of supplementary cementitious materials (SCM). However, the performance of HCP after exposure to elevated temperatures requires further evaluation. The present study investigates the influence of different replacements of silica fume (SF) to cement and different water/binder ratios (w/b) on the compressive strength of HCP before and after exposure to elevated temperatures. Eighteen mixes have been prepared and tested. Results of compressive strength tests at ambient temperature were ranged from 58 to 102 MPa depending on the difference of w/b. Furthermore, a new method has been adopted for comparing the responses of HCP at elevated temperatures "heat endurance". Results showed that using SF enhances the residual compressive strength of HCP after exposure to elevated temperatures due to the pozzolanic reaction and the filler contribution. Mixes containing 6%, 12%, and 15% of SF have shown the highest relative residual compressive strength values for 0.30, 0.35, and 0.40 w/b, respectively. Consequently, the results were significantly affected by changing the w/b ratio. Finally, different measurement techniques were provided to support the work, including Thermo-Gravimetric (TG), Computed Tomography (CT), and Scanning Electron Microscope (SEM) analysis to characterize the loss of mass, porosity, and micro-structure alteration of HCP.
Keywords:
silica fume, elevated temperatures, cement paste, water to binder ratio, supplementary cementitious materialPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

