The Resistance of Fiber-reinforced Concrete with Steel Fibers and CFRP to Drop-weight Impact
Abstract
In this paper, the effects of macro-synthetic steel fibers and bidirectional carbon fiber-reinforced polymers (CFRPs) on the impact resistance of concrete specimens were studied. 54 concrete cylindrical specimens with different compressive strengths (20, 30, and 40 MPa) and with different fiber content ratios (0 %, 1 %, 1.5 %, and 2 %) were tested under impact loading. Half of these specimens were tested with the CFRP wrapping. The specimens were subjected to weight (46.7 and 66.8 kg) dropping at a height of 1.62 m. The process of weight dropping was continued until 30 % weight loss in the specimens was observed and the number of weight droppings related to this loss was recorded. Results indicated that the impact resistance of the concrete specimens (corresponding to the number of weight droppings) increased by using steel fibers or CFRP wrapping, separately. However, the results demonstrated that the specimens wrapped with the CFRP sheets had much further impact resistance than the FRCs without wrapping. Finally, the results showed that the greater the compressive strengths of the concrete, the better the impact resistance.
Keywords:
drop-weight impact, steel fibers, carbon fiber-reinforced polymer (CFRP) wrapping, impact resistance, damage patternsPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

