A New Approach to the Optimal Placement of the Viscous Damper Based on the Static Force Distribution Pattern
Abstract
Viscous dampers (VDs) are currently used an effective earthquake risk reduction measure. Due to the high cost of this type of dampers, an optimal damper layout across the stories will specifically improve the seismic response and reduce building costs. This paper introduces a new simple three-stage method to determine the optimal placement of VDs on different stories of reinforced concrete structures. In the first stage, the damping demand of each story was determined using the distribution pattern of earthquake forces by the equivalent static method and the story velocity obtained through time-history analysis. In the second stage, the number of dampers required for the structure was calculated, and the location and damping percentage of dampers were precisely determined through an iterative process in the third stage. An indicator representing all basic structural responses was used to evaluate the multiple choices for the damper layout. This process was evaluated for 4, 8 story concrete frames under a near-field earthquake. The results indicated the efficiency of the proposed method in determining the location and damping of VDs on different stories of the structure.
Keywords:
viscous damper, near-field earthquake, three-stage algorithm, optimal layout, equivalent static methodPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

