Comparison of Field and Laboratory Result of Fiber Reinforced Shotcrete Application
Abstract
Synthetic fibers, which have become one of the main components of shotcrete, have been studied by many researchers in the laboratory environment. Unfortunately, the results obtained as a result of these researches are not suitable for underground chimneys due to the differences in ambient conditions and application differences. In this study, it is aimed to compare the results of the experiment samples prepared and kept in the laboratory with the mechanical properties of the shotcrete applied in underground conditions. For this purpose, keeping the slump and cement proportions constant, 35 cubic samples were prepared using 2 and 6 kg synthetic fiber for 1 m3 in the laboratory, and 30 cylinder samples and 6 plate samples were prepared for underground. While mechanical experiments were carried out on prepared cube and cylinder samples, the EFNARC plate test and freeze-thaw test were carried out on plate samples. It was observed that the set accelerator made a significant increase in resistance at the end of the 28 days and that the resistance of the samples prepared with polyester fibers in the laboratory environment were very high. As a result of the EFNARC panel tests performed, it was determined that the energy absorption of synthetic fibers increased with fiber amount. Thanks to this study, the energy absorption of the synthetic fiber used has been measured, and the reliability and practicality of the experiments carried out in the laboratory have been increased by evaluating the field conditions and laboratory conditions.
Keywords:
fiber, freeze-thaw cycles, shotcrete, underground conditionsPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

