Effect of Stirrup Spacing and Polypropylene Fiber Ratio on Behavior of Reinforced Concrete Beams
Abstract
In this study, the effect of the change of stirrup ratio and polypropylene (PP) fiber ratio on the behavior of reinforced concrete beams was investigated. The variables of this study consisting of without stirrup, spacing up to 20 %, 40 % and 80 % of beam depth as stirrup spacing and 0.125 % and 0.500 % of the weight of reinforced concrete beam were used as PP fiber ratios. In the context of experimental study, 1/2 scaled 12 reinforced concrete beams were tested with 4-point bending mechanism. In the light of the obtained data, the load-displacement, stiffness and energy absorption graphs were plotted. The results were interpreted comparatively. According to the results, it is observed that the PP fiber additive significantly changed the behavior of the reinforced concrete beams, and the fiber effect decreased in proportion to the increase of the stirrup rate. It has been observed that the cracks spread more to the beam surfaces with the increase of PP fibers. In addition, the increase in the fiber ratio especially in the non-stirrup beams increases the bending capacity.
Keywords:
reinforced concrete beam, stirrup ratio, polypropylene fiber, experimental study, damage mechanicPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

