Inverse Calculation of Timber-CFRP Composite Beams Using Finite Element Analysis
Abstract
This study focuses on the flexural behavior of timber beams externally reinforced using carbon fiber-reinforced polymers (CFRP). Linear and non-linear finite element analysis were proposed and validated by experimental tests carried out on 44 timber beams to inversely determine the material properties of the timber and the CFRP. All the beams have the same geometrical properties and were loaded under four points bending. In this paper the general commercial software ANSYS was used, and three- and two-dimensional numerical models were evaluated for their ability to describe the behavior of the solid timber beams. The linear elastic orthotropic material model was assumed for the timber beams in the linear range and the 3D nonlinear rate-independent generalized anisotropic Hill potential model was assumed to describe the nonlinear behavior of the material. As for the CFRP, a linear elastic orthotropic material model was introduced for the fibers and a linear elastic isotropic model for the epoxy resin. No mechanical model was introduced to describe the interaction between the timber and the CFRP since failure occurred in the tensile zone of the wood. Simulated and measured load-mid-span deflection responses were compared and the material properties for timber-CFRP were numerically determined.
Keywords:
spruce, CFRP, reinforcement, material properties, inverse computation, finite elementPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

