Influence of Nano-silica and Crack Width on Corrosion Parameters of Pre-cracked Reinforced Concrete Beams
Abstract
This paper presents an experimental study on the durability of both sound and cracked reinforced concrete (RC) beam specimens. Using nano-silica (NS) can improve the durability properties of reinforced concrete. So, RC beams with three nano-silica percentages of 0 %, 1.5 %, and 3 % were prepared. In addition, to consider the effect of cracking on corrosion, crack widths between 0.1 mm and 0.5 mm, and cover depths of 30 mm and 45 mm were considered. All beam specimens were subjected to 5 % NaCl solution and monitored weekly for half-cell potentials (HCP). The presented results include the HCP evaluation and diffusion factor values in sound and cracked concrete beams exposed to chloride attack. The experimental results indicated that the chloride diffusion coefficient increases with extending crack width. Nano-silica improved the permeability characteristics of concrete, HCP and also diffusion factor values. Regressive models of the chloride diffusion factor and HCP values were proposed for influencing parameters, i.e., nano-silica and crack width with two different cover depths.
Keywords:
corrosion, nano-silica, half-cell potential, diffusion coefficient, cracked concrete, cover depthPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

