Analytically Determining Bond Shear Strength of Fully Grouted Rock Bolt Based on Pullout Test Results
Abstract
Usually, in a fully grouted rock bolt pullout test the load-displacement curve of the rock bolt head is recorded. This paper presents an analytical method to use this curve for determining the bond (bolt-grout and grout-rock interface) shear strength parameters. For this purpose, the fully grouted rock bolt interaction with grout and surrounding rock in the pullout test is investigated and the load-displacement curve of the bolt head (beginning of the bonded section) is obtained analytically. For modeling the bolt-grout interface behavior a distribution of the shear stress along the fully grouted rock bolt by consideration of bolt shank failure is used. In this regard, different stages including complete bonding, partial decoupling, decoupling with the residual shear strength and complete decoupling are considered. With increasing the applied load, two possible cases involving the rock bolt complete pullout and bolt shank yielding are taken into account. Based on the presented analytical method, the obtained bolt head load-displacement curve can be compared with the one recorded in the pullout test. With this, the relevance of selected shear strength parameters compared to real parameters can be assessed. A flowchart for determining the bolt bond shear strength parameters is presented using the trial and error method (coded in Matlab). The proposed solution is used to determine two experimental pullout shear strength parameters. The results show good agreement between predicted and calculated load-displacement curves.
Keywords:
load-displacement curve, fully grouted rock bolt, pullout test, bond shear strengthPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

