Analytical Study on the Effective Flange Width for T-shaped Shear Walls
Abstract
This study was organized to derive simplified expressions to estimate the effective flange width for T-shaped shear walls at different loading stages. For that purpose, the variation in the effective flange width was explored by introducing dimensionless effective flange width coefficient. According to the principle of minimum potential energy, the theoretical expression of the effective flange width coefficient in the elastic stage was obtained. Furthermore, a parametric study considering the axial load ratio, height-width ratio of flange and width-thickness ratio of the flange, as well as the section aspect ratio was conducted to determine the effective flange width using verified nonlinear finite-element models. In light of the parametric analysis results, a formula model was proposed depending on the axial load ratio and height-width ratio of flange. Finally, the predictions of the proposed simplified formulas were verified with the theoretical solutions or finite element (FE) results, which indicated that the proposed formulas can accurately capture the effective flange width at the elastic, yield and limit state.
Keywords:
shear walls, shear lag effect, effective flange width, principle of minimum potential energy, FEMPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

